3-Doppstadt_SM720 final

00:00:00: And next machine here in the crushing zone is from Doppstadt.

00:00:04: Which machine can we see an operation hear?

00:00:07: Here, We are presenting our SM-CM-SVII-T point three K a new development on a crawler track.

00:00:15: The Machine was specially developed to produce large quantities of material efficiently and be used flexibly On different construction sites.

00:00:24: And what material are you working with in this demonstration here?

00:00:28: In our example, we're processing construction waste with a grain size of approximately zero to eighty millimeters.

00:00:36: This material is often found on construction sites or recycling centers and must be processed reliably.

00:00:43: What challenges do operators face such materials?

00:00:48: Well, many construction sites have large quantities of material with a wide variety of components.

00:00:54: Turning the materials often causes a lot disturbance which can mix and lead to contamination.

00:01:01: This makes clean and efficient processing difficult.

00:01:04: And what solution does the SM-Seven-Twenty point K offer for this situation?

00:01:10: Well the machine has a very large feed hopper with additional hydraulic supports so that even large quantities of material can be handled without any problems.

00:01:21: In addition, The Large Bunker Volume in combination with the forty millimeter drum ensures high throughput and efficient material separation.

00:01:30: What are advantages for customer daily operation?

00:01:35: One major advantage is mobility.

00:01:38: Thanks to its crawler tracks, the machine can move independently around the site and be used directly where the material is produced.

00:01:47: This saves time reduces internal transport And increases efficiency on construction sites.

00:01:53: If you had to summarize The most important advantages of a machine in few words What would say?

00:02:00: Well, I'll start with the power options.

00:02:03: The SM-CM-SVII can be powered by an eighty five kilowatt diesel or a seventy electric motor.

00:02:13: Within the SM-point three series, you also have the option of operating a machine with dual power either diesel or electric.

00:02:22: and now to the advantages high throughput large feed capacity flexible mobility on site and efficient processing of large quantities of material.

00:02:33: Thanks for the moment to Doppstadt!

00:02:35: And let's hand over our next one.